Cue containing several movements causes freeze

Post Reply
JCL
Posts: 17
Joined: Fri Apr 04, 2008 11:02 am

Cue containing several movements causes freeze

Post by JCL » Wed Nov 25, 2015 12:56 pm

Hi,
Here is the problem :

in v1.3,

When a cue containing more than one movement effect is sent on stage , the console immediately freezes.

In the file attached, in cue 1 are recorded 3 different movements on 3 fixtures (Rush MH2), the others remaining static.

The result should be the same as in submaster 2 but instead the console freezes.

Hope you can help,
Thanks
Attachments
cyue1.zip
(11.01 KiB) Downloaded 82 times

jacklin
Posts: 1
Joined: Wed Jun 12, 2013 9:09 pm
Primary Venue / Use: Other
Where I Am: china--DONGGUANG

Re: Cue containing several movements causes freeze

Post by jacklin » Tue Jan 12, 2016 10:37 pm

Hi Jcl:

I update the Cyue1 ShowFile to test . then I run Cue1 . cue2 ….. . the console don’t freezes.
Then I run submaster 2. The same result . don’t freeze.

Jacklin

JCL
Posts: 17
Joined: Fri Apr 04, 2008 11:02 am

Re: Cue containing several movements causes freeze

Post by JCL » Fri Jan 15, 2016 4:35 am

Hi,

I am not sure why you your console accepted to run the cues i sent you last time ...so instead we tried to recreate them ( FYI in the attached file the show cue123 has cue 2 and 3 freezing the console, also contains all folder , v1.3 was installed)

record a cue (its content doesn't really matter).
select a fixture, create an effect (we used movement effect but you should try with other types).
UPDATE the existing cue.

release the select channels and fixture

load the cue you just created and "GO"

the console freezes: no DMX on output, no change on vga nor LCD
power cycle the console, everything is fine 'til you try

I think it might help you localize the issue ,"UPDATE" it seems

If you need them I have made photos of the setup screen.
Attachments
250ML.zip
cue123=console freeze, sub1n1=inhibitive with channels...
(581.51 KiB) Downloaded 348 times

JCL
Posts: 17
Joined: Fri Apr 04, 2008 11:02 am

Re: Cue containing several movements causes freeze

Post by JCL » Fri Jan 15, 2016 5:47 am

pictures of patch and setup
Attachments
DSC_0829[1].JPG
DSC_0829[1].JPG (1.54 MiB) Viewed 1614 times
DSC_0828[1].JPG
DSC_0828[1].JPG (1.96 MiB) Viewed 1614 times

Post Reply