Briteq BT-W36L3

Post Reply
Philip
Posts: 1
Joined: Mon May 26, 2014 10:10 am
Primary Venue / Use: Professional Theatre
Where I Am: Germany, Hessen, Neu-Isenburg

Briteq BT-W36L3

Post by Philip » Mon May 26, 2014 10:29 am

Hello,


i just created a fixture for my LED-Pars (Stairville 12x3W Outdoor)
they run in RGB Mode without Dimmer-channel. Everything's good.

After that i tried to create a Fixture for "Briteq BT-W36L3" LED-washer. They run in a 12ch mode with "non-linear" channels
While saving i get error ' Please set all "Attribute" items before saving! ' :(

Image

If anyone could help me i would be very grateful :)


http://www.beglec.com/manuals/4344.pdf Page 13-15.


greetings Philip Gerhard

inky
Posts: 5
Joined: Thu May 22, 2014 1:50 am
Primary Venue / Use: Regional Theatre
Where I Am: Germany/NRW
Location: Germany

Re: Briteq BT-W36L3

Post by inky » Tue May 27, 2014 6:09 am

Hello Philip,

I have the 250ML since 1 week and this happened to me too.
It's a Bug in the Fixture Creator!
The Fixture Creator didn't store one of the Attributes.
Set the "Attribute Group" for each Channel once more. and then it works.

greetings Jürgen

martin144
Posts: 19
Joined: Fri Mar 21, 2014 4:47 pm
Primary Venue / Use: Regional Theatre
Where I Am: Starnberg, Germany, Bavaria

Re: Briteq BT-W36L3

Post by martin144 » Tue Dec 02, 2014 4:44 pm

...in summary, it's buggy like hell.
Please improve the software...

User avatar
BobbyHarrell
Posts: 2280
Joined: Fri Oct 12, 2007 10:51 am
Location: Livingston, NJ
Contact:

Re: Briteq BT-W36L3

Post by BobbyHarrell » Tue Dec 02, 2014 8:27 pm

I've sent this to our software team in China.
Bobby Harrell - Product Specialist
Philips Entertainment - Strand Lighting

User avatar
BobbyHarrell
Posts: 2280
Joined: Fri Oct 12, 2007 10:51 am
Location: Livingston, NJ
Contact:

Re: Briteq BT-W36L3

Post by BobbyHarrell » Tue Dec 02, 2014 9:54 pm

In this case there is an error in the fixture. The Pan /PanFine is 16 bit. The Pan Type attribute should be LTP 16bit instant H and the PanFine Type should be LTP 16bit instant L. The error generates the error when you save.
Bobby Harrell - Product Specialist
Philips Entertainment - Strand Lighting

Post Reply