10.8.1 Background Color Erratic
-
- Posts: 144
- Joined: Wed Mar 11, 2009 11:44 pm
- Primary Venue / Use: Local Theatre
- Where I Am: New York State
- Location: Upstate New York, USA
10.8.1 Background Color Erratic
Since uprading to 10.8.1, the background (Q-list area) color behaves erratically. Usually when booting up the color is not there (just black). At random times the color will show up, and then at equally random times revert to black... Also now, the current cue shows up in white, not the usual yellow.... Any ideas? Thanks.
Jim Mackenzie
Classic Palette II
10.8.7
Classic Palette II
10.8.7
-
- Posts: 144
- Joined: Wed Mar 11, 2009 11:44 pm
- Primary Venue / Use: Local Theatre
- Where I Am: New York State
- Location: Upstate New York, USA
Re: 10.8.1 Background Color Erratic
I guess the current cue color issue is more related to the channel grid color issue... See other related thread... Thanks.
Jim Mackenzie
Classic Palette II
10.8.7
Classic Palette II
10.8.7
-
- Posts: 144
- Joined: Wed Mar 11, 2009 11:44 pm
- Primary Venue / Use: Local Theatre
- Where I Am: New York State
- Location: Upstate New York, USA
Re: 10.8.1 Background Color Erratic
Could it be a bad monitor..?
Jim Mackenzie
Classic Palette II
10.8.7
Classic Palette II
10.8.7
-
- Posts: 144
- Joined: Wed Mar 11, 2009 11:44 pm
- Primary Venue / Use: Local Theatre
- Where I Am: New York State
- Location: Upstate New York, USA
Re: 10.8.1 Background Color Erratic
Cue color problem fixed (bad VGA cable was cutting out yellow signals to monitor).
Still have the background color issue. It comes and goes, and seems to be related to the 10.8.1 upgrade..
Anyone else notice this??
Still have the background color issue. It comes and goes, and seems to be related to the 10.8.1 upgrade..
Anyone else notice this??
Jim Mackenzie
Classic Palette II
10.8.7
Classic Palette II
10.8.7
- RobertBell
- Posts: 2421
- Joined: Fri Oct 12, 2007 1:11 pm
- Primary Venue / Use: Other
- Where I Am: Horizon Control Inc
- Location: On the dark side just north of Toronto
- Contact:
Re: 10.8.1 Background Color Erratic
Occasionally on boot you see faint blue (periwinkle) behind fixture numbers. Going to BLIND and LIVE fixes this. We don't know why this happens. It's a left over colour from pre Ver.10. Can't seem to nail it.
Robert Bell - Product Manager - Horizon Control Inc.
-
- Posts: 144
- Joined: Wed Mar 11, 2009 11:44 pm
- Primary Venue / Use: Local Theatre
- Where I Am: New York State
- Location: Upstate New York, USA
Re: 10.8.1 Background Color Erratic
My issue is not with channel grid color, but with loss of selected background color for the cue list area..
Jim Mackenzie
Classic Palette II
10.8.7
Classic Palette II
10.8.7