Page 1 of 1

App for iPad control

Posted: Sat Jul 04, 2015 9:05 pm
by GerMan
Hello,

is there also own App for the control of the console by iPad?
The App LFRemote is hardly to be used. PAN/TILT does not function at all and Submaster 10% to 90% bring with 1% to 9% in each case as a DMX output.
Only from 10% the value is right. :(


ciao
Maik

Re: App for iPad control

Posted: Mon Jul 06, 2015 10:16 am
by BobbyHarrell
I'll ask Martin to look at this.

Re: App for iPad control

Posted: Mon Jul 06, 2015 11:24 pm
by msearancke
I have found and fixed an issue with submasters using the app. I was able to apply a fix within NEO itself to reolve this. Essentially the direct 1 digit feature would cause values send from the remote below 10 being recognized by the system as values x10.

I was not however able to see a problem with the pan and tilt control. This worked as expected on my phone.

Martin

Re: App for iPad control

Posted: Thu Aug 13, 2015 6:34 am
by GerMan
I have tried the use of P/T with several devices unsuccessfully. They can be selected per App, the intensity can be shifted and the colour is changeable.
Only P/T does not function.

Image
Image

BTW: It would be great if the app stored in future the access data. It is very uncomfortable if one must give these data regularly anew.


ciao, Maik

Re: App for iPad control

Posted: Fri Sep 11, 2015 2:23 am
by GerMan
Is there here no solution for the problem? :cry:


ciao, Maik

Re: App for iPad control

Posted: Fri Sep 11, 2015 8:00 am
by BobbyHarrell
I've asked Martin to take a look.

Re: App for iPad control

Posted: Sun Sep 13, 2015 7:10 pm
by msearancke
I have tested this with a VL440 and a VL4K and it appears to be working as expected for me. I also tested with both an iOS and Android device (not sure what you are using). I only tested phone format devices as it does not look like a tablet in your photos.
There have been no changes recently that I can think of that would make a difference here so I am at a loss as to what this might be.
Are you running the latest 3.5 release or beta version?

Martin

Re: App for iPad control

Posted: Wed Sep 16, 2015 10:37 am
by GerMan
The problem probably resulted from the changed regional settings which I have put back now again.

viewtopic.php?f=62&t=6601#p20513

Now also functions PAN/TILT with the app.

However, I hope that the application is still developed.
It should be absolutely possible to save access data (IP).


thanks
Maik

Re: App for iPad control

Posted: Wed Sep 30, 2015 1:09 pm
by GerMan
Hello,
with iOS9 the App cannot be used any more (iPad and iPhone). She opens only one moment and then closes again. :shock:
When there be an app update and is it with the opportunity maybe like improvements (as for example to memories of the IP addresses)?


ciao, Maik

Re: App for iPad control

Posted: Wed Sep 30, 2015 2:51 pm
by BobbyHarrell
We know about iOS 9 incompatibility and it will be address in the next few weeks.