Issue when Fx releasing

Welcome to the public forum for the NEO. The next generation of Philips Strand Lighting's theatrical lighting control console.
Post Reply
Posts: 2
Joined: Wed Jun 07, 2017 4:47 pm
Primary Venue / Use: Other School
Where I Am: Maryland USA

Issue when Fx releasing

Post by wheels00000 » Thu Jan 25, 2018 1:57 pm

So I'm currently having the issue with a cue with a color fx. The Fx is running in the 1st cue the next cue it goes to a static color instead of fading to the next color the Fx fades out then the color fades in. Anybody got any ideas I want it to crossfade from the effect to the static color.

User avatar
Posts: 2321
Joined: Fri Oct 12, 2007 10:51 am
Location: Livingston, NJ

Re: Issue when Fx releasing

Post by BobbyHarrell » Fri Jan 26, 2018 11:41 am

I believe this is likely a Profile FX. To change this, go into the FX Editor (FX List) and select the FX. You'll find that the Offset is at DMX 0. Just change this to HTP. (Just type it in). That will allow it to work.

FYI, you may have to go back to the cue with the FX and change the cue's color data to black (RGB @ 0).

Otherwise, you'll be good to go.
Bobby Harrell - Product Specialist
Philips Entertainment - Strand Lighting

Post Reply