Page 1 of 1

Calibrating Scrollers

Posted: Thu Oct 26, 2017 4:48 pm
by Umstattd
Hello Bobby,
Is there a comparable NEO function to the "calibration" function on the ETC Ion?? I have a couple of scroller frames that are not quite right.

Thanks,
Mike

Re: Calibrating Scrollers

Posted: Thu Oct 26, 2017 8:55 pm
by msearancke
Sorry we do not have an equivalent function to that.
The best solution would be to use a dimmer profile to adjust the output that DMX channel.

Martin

Re: Calibrating Scrollers

Posted: Tue Oct 31, 2017 11:28 am
by Umstattd
OK, that's a bummer. I'm not sure how to do that with the dimmer profile, but I'll give a whirl.

Thanks,
Mike

Re: Calibrating Scrollers

Posted: Tue Oct 31, 2017 2:41 pm
by BobbyHarrell
In patch, you can edit a dimmer profile. You'll just need to add enough "points" in the profile for each frame and adjust as needed.

Re: Calibrating Scrollers

Posted: Thu Nov 02, 2017 10:39 am
by Umstattd
Thanks . I took a simpler approach to see if it would work. Surprisingly, it did. I just slid the endpoint of the curve a little bit clockwise on the graph which makes the values later. The frames are now centered in all the frames. Not sure that was the "correct" method, but it seems to work.

Mike

Re: Calibrating Scrollers

Posted: Thu Nov 02, 2017 7:05 pm
by BobbyHarrell
If it works...