NEO -> Enttec ODE Open DMX Ethernet

Welcome to the public forum for the NEO. The next generation of Philips Strand Lighting's theatrical lighting control console.
Post Reply
GerMan
Posts: 58
Joined: Sun Jun 28, 2009 12:05 pm
Primary Venue / Use: Professional Theatre
Where I Am: Engineer and Operator
Location: Germany

NEO -> Enttec ODE Open DMX Ethernet

Post by GerMan » Mon May 11, 2015 5:28 am

Hello,

is it possible to use Enttec ODE Open DMX Ethernet directly in the console on LAN (ArtNet)? In the NEO settings only the Enttec devices which are connected by USB exist.
Same would interest me with the LSS MasterPort RM.

thanks, Maik

User avatar
BobbyHarrell
Posts: 2280
Joined: Fri Oct 12, 2007 10:51 am
Location: Livingston, NJ
Contact:

Re: NEO -> Enttec ODE Open DMX Ethernet

Post by BobbyHarrell » Mon May 11, 2015 8:49 am

I'll ask "The Architect" to look at it.
Bobby Harrell - Product Specialist
Philips Entertainment - Strand Lighting

User avatar
msearancke
Posts: 62
Joined: Thu Jan 30, 2014 4:13 pm
Primary Venue / Use: Professional Theatre
Where I Am: Auckland, New Zealand

Re: NEO -> Enttec ODE Open DMX Ethernet

Post by msearancke » Mon May 11, 2015 5:47 pm

Yes, any Ethernet to DMX device that supports ArtNet, sACN, ShowNet, Pathport will work with the console.
The ODE is configured for ArtNet out of the box.

Martin

Post Reply