Page 1 of 1

Briteq BT-W36L3

Posted: Mon May 26, 2014 10:29 am
by Philip
Hello,


i just created a fixture for my LED-Pars (Stairville 12x3W Outdoor)
they run in RGB Mode without Dimmer-channel. Everything's good.

After that i tried to create a Fixture for "Briteq BT-W36L3" LED-washer. They run in a 12ch mode with "non-linear" channels
While saving i get error ' Please set all "Attribute" items before saving! ' :(

Image

If anyone could help me i would be very grateful :)


http://www.beglec.com/manuals/4344.pdf Page 13-15.


greetings Philip Gerhard

Re: Briteq BT-W36L3

Posted: Tue May 27, 2014 6:09 am
by inky
Hello Philip,

I have the 250ML since 1 week and this happened to me too.
It's a Bug in the Fixture Creator!
The Fixture Creator didn't store one of the Attributes.
Set the "Attribute Group" for each Channel once more. and then it works.

greetings J├╝rgen

Re: Briteq BT-W36L3

Posted: Tue Dec 02, 2014 4:44 pm
by martin144
...in summary, it's buggy like hell.
Please improve the software...

Re: Briteq BT-W36L3

Posted: Tue Dec 02, 2014 8:27 pm
by BobbyHarrell
I've sent this to our software team in China.

Re: Briteq BT-W36L3

Posted: Tue Dec 02, 2014 9:54 pm
by BobbyHarrell
In this case there is an error in the fixture. The Pan /PanFine is 16 bit. The Pan Type attribute should be LTP 16bit instant H and the PanFine Type should be LTP 16bit instant L. The error generates the error when you save.