Page 1 of 1

Busking on the 250 ML

Posted: Sat Aug 26, 2017 7:03 pm
by DNT
I wonder if any users have had issues when busking on the 250 ML. I have set up a number of LEDs in the fixture section (ie above channel 250) and they work fine in cues, but on some occasions I need to have the subs set up with one for Red, one for Green one for Blue etc. and I mix the colours live. It seems to work fine and the colours mix well initially. However, once a few mixes have been done, I find some colours stay at full until the slider is brought down to zero and then that colour snaps out. This is not great in a live situation. I have taken care to set up the desk to only record the colour and leave all other attributes alone, and I also set each sub to fade all attributes. It works fine in the first few mixes (ie when I add red and blue I get magenta, then add another colour to make a third option etc) but at some stage, when I begin to take a colour down, nothing happens until it snaps out at the end.

If there are any regular users of the desk who have a solution for this, I would love to hear from them.


Denis Twomey