Page 1 of 1

Strand ML250 Firmware Upgrade

Posted: Mon Sep 14, 2015 4:33 pm
by GeoffClarke
Hi

As updating firmware is a slightly risky business, I want to clarify the procedure as the manual is a bit vague. The firmware upgrade file on the site if I remember correctly is a zip file. Do I unzip this file to a usb stick, or leave it as a zip file.

The upgrade procedure is in two halves update the control desk itself and also update the VGA display controller, when updating the display controller do I use the same firmware file used to update the control desk, or is there another file somewhere on the Strand site.

It's probably all a mute point, as going off the other posts on this forum the upgrade isn't going to solve the problems we are having but I believe this is our best action at this point for a desk that reboots itself mid show for no apparent reason.

Geoff Clarke

Re: Strand ML250 Firmware Upgrade

Posted: Mon Nov 02, 2015 12:52 pm
by GeoffClarke
Bobby
I have posted the question above, can you please give me an answer.

The reason I'm asking the console came from the Factory with the console on Version 1.2 and the VGA screen on Version 1.1.08.

Thx