Page 1 of 1

Using the FAN option

Posted: Wed Jul 01, 2015 7:13 am
by Thilo
Hi,

does anybody knows, how the fan option works?
I have some Showline 100 and some RGB Spots. I want to fan over the colour or the position. If you press the "shift" and e.g. "colour" or "position" button, there are the fan options, but nothing happens?

Re: Using the FAN option

Posted: Wed Jul 01, 2015 5:12 pm
by mpeters
For the Fan option to work, you will first select the lights that you want to fan and then hold Down Shift and select either Color or Position. A list of options will appear on the screen for Fan First, Fan Middle, Fan Last and Fan V. Once you have selected the Fan option you will hold shift and rotate one of the encoders for the color attributes if you want to fan color or Pan/Tilt if you want to Fan the position of the lights you have selected. You will notice once you hold down shift it will list the fan option you selected below the 4 encoder boxes. Give this a shot and if you have any questions, let me know, thanks.

Matt Peters - Tech Support