Off-Line Editor

Is this a feature? Is this a bug? Give us feedback to make it better!
Post Reply
otto
Posts: 2
Joined: Sat Feb 02, 2008 8:16 am

Off-Line Editor

Post by otto » Sun Mar 02, 2008 10:53 am

If I try to bring channels up with 5 seconds time, it goes to Full, ([1] @ [50] @ [5] [enter]), but if I put 10 or more seconds works ok.
Is this a Bug?
Regards
Otto A.

User avatar
BobbyHarrell
Posts: 2280
Joined: Fri Oct 12, 2007 10:51 am
Location: Livingston, NJ
Contact:

Re: Off-Line Editor

Post by BobbyHarrell » Sun Mar 02, 2008 12:17 pm

Otto,

I am running 10.1.2 and when I type 1 @ 5 @ 5 ENTER. The command line says 1 At 5 In Time 5* and channel 1 is at 50%.

So I cannot reproduce. Are you in Command Line mode or 1 or 2 digit mode? I am in Command Line mode. Check in Hardware Setup > Console > Level Entry Mode.
Bobby Harrell - Product Specialist
Philips Entertainment - Strand Lighting

otto
Posts: 2
Joined: Sat Feb 02, 2008 8:16 am

Re: Off-Line Editor

Post by otto » Sun Mar 02, 2008 2:12 pm

Running V. 10.0.1, Entry mode.
Otto A.

User avatar
RobertBell
Posts: 2421
Joined: Fri Oct 12, 2007 1:11 pm
Primary Venue / Use: Other
Where I Am: Horizon Control Inc
Location: On the dark side just north of Toronto
Contact:

Re: Off-Line Editor

Post by RobertBell » Sun Mar 02, 2008 6:08 pm

Bug - :added: FS527
Thanx Otto
Robert Bell - Product Manager - Horizon Control Inc.

User avatar
BobbyHarrell
Posts: 2280
Joined: Fri Oct 12, 2007 10:51 am
Location: Livingston, NJ
Contact:

Re: Off-Line Editor

Post by BobbyHarrell » Sun Mar 02, 2008 10:38 pm

Robert,

Does this mean that you could reproduce it?
Bobby Harrell - Product Specialist
Philips Entertainment - Strand Lighting

User avatar
RobertBell
Posts: 2421
Joined: Fri Oct 12, 2007 1:11 pm
Primary Venue / Use: Other
Where I Am: Horizon Control Inc
Location: On the dark side just north of Toronto
Contact:

Re: Off-Line Editor

Post by RobertBell » Mon Mar 03, 2008 9:03 am

Yes - try [50] [Enter] vs [5] [Enter] (as was originally posted)
Robert Bell - Product Manager - Horizon Control Inc.

Post Reply