Page 1 of 1

Power switch not working

Posted: Mon Oct 28, 2013 5:06 pm
by willarki
Seemingly forever we have had an intermittent problem when swithing on our Classic Palette (Silver version). Sometimes you would have to flick the switch a dozen times or so to get it to start. Over the weekend just passed, one of my operators rang me unable to start it at all. Advised him to unplug all the USB tiles but still no go. Another thought occurred to me that the switch itself was the problem. Yep it sure was. The wires were simply wrapped around the terminals, no solder in evidence, and concealed by a cover. Turns out this was the problem.

Obviously came out of the factory this way all those years ago!!!

:roll:

Re: Power switch not working

Posted: Tue Oct 29, 2013 4:23 pm
by BobbyHarrell
I'll talk to the responsible parties about this.

Thanks