Page 1 of 1

10.8.1 range with indep times

Posted: Thu Oct 28, 2010 9:03 am
by gooze
If you use the following syntax:
1[TRU]6@0@0-1/0[Enter]
It is expected that channels 1 through 6 end up at zero. In reality only channel one goes to zero.
Independent times work as expected.

Re: 10.8.1 range with indep times

Posted: Mon Nov 08, 2010 11:18 am
by RobertBell
Works here. I'm using ENTER syntax in Hardware Setup | Console