Page 1 of 1

Problem with pan & tilt

Posted: Mon Jul 20, 2009 2:41 pm
by bnortin
We're having an issue when we swap pan & tilt on a moving-mirror fixture, specifically Rosco I-Cues, Cyberlights & Intellabeams. By default the I-Cues have a pan range of -115 to +115 degrees and a tilt range of -28.6 to +28.6 degrees. When pan & tilt are swapped, the limits seem to stay with the encoders, not with the attributes in the profile. After swapping, the I-Cue is limited at the console to only "tilt" (actually pan on the fixture) -28.6 to +28.6 degrees. With "pan", the console says it can go from -115 to +115 degrees, but the fixture is physically limited to -28.6 to +28.6 degrees. Is there a way to fix this issue at the console or is it something in the OS or fixture profile?

Re: Problem with pan & tilt

Posted: Mon Jul 20, 2009 2:47 pm
by BrianEvans
Known issue.

Hopefully will be fixed in 10.8 release, and 10.7 series Beta.

Re: Problem with pan & tilt

Posted: Mon Jul 20, 2009 2:53 pm
by bnortin
ok, thanks

Re: Problem with pan & tilt

Posted: Mon Nov 01, 2010 7:45 pm
by MickCrozier
This bug still present in 10.8 - Really could have used it today :(