Page 1 of 3

10.6 Tutorials

Posted: Thu Jun 04, 2009 8:11 am
by BobbyHarrell
Here is the first (of hopefully many) tutorials. Please give me your feedback. latest update in further posts.

Re: 10.6 Tutorials

Posted: Thu Jun 04, 2009 9:03 am
by gooze
Nice.
PaletteOS is the Palette Operating Software and it is the only version of the console software
that runs on all Palette and LightPalette consoles.
Is a bit confusing. You mean that this software runs on all consoles? Or is there software around that isn't compatible with the consoles?

I would move the UNDO part forward, because if people start trying to put channels up, they also want to know how to release them again.

Maybe you should mention [SHIFT][TRU] tru-on. People always start smiling when I tell them!

Re: 10.6 Tutorials

Posted: Thu Jun 04, 2009 9:38 am
by BobbyHarrell
Good points. Thanks Gooze.

Re: 10.6 Tutorials

Posted: Fri Jun 05, 2009 10:24 am
by BobbyHarrell
Request for opinions: Would you want these tutorials to only be available as a separate download or would you want them available on the console itself?

Re: 10.6 Tutorials

Posted: Fri Jun 05, 2009 10:54 am
by mat
I vote for the console itself

Re: 10.6 Tutorials

Posted: Fri Jun 05, 2009 11:14 am
by PhilFoleen
I vote both. Since you get the Palette software both on the console and online, the tutorials should be available both ways as well. we can't leave out the people that only download the OLE. :)

Re: 10.6 Tutorials

Posted: Fri Jun 05, 2009 12:17 pm
by golights
Both, should help future owners decide to purchase.

Re: 10.6 Tutorials

Posted: Fri Jun 05, 2009 1:07 pm
by jmac
Ok- Where and what is [SHIFT[]TRU] tru-on?? I'd like to smile...!

Re: 10.6 Tutorials

Posted: Fri Jun 05, 2009 1:36 pm
by BobbyHarrell
Thru On allows you to select all channels thru a range that are on...ignoring the channels in that range that are off.

Just type 1 SHIFT THRU 100 ENTER while sitting in a cue and you'll see that it will select only the channels that are on.

Re: 10.6 Tutorials

Posted: Fri Jun 05, 2009 2:22 pm
by BobbyHarrell
Updated tutorial. Please comment.