Page 1 of 1

Profile Request: Chauvet Ovation B-2805FC

Posted: Thu Jul 06, 2017 5:16 pm
by gafftaper
Hi,

Can I get profiles for the Chauvet Ovation B-2805FC?
I think this is all the data you need to make the profiles: https://www.chauvetprofessional.com/wp- ... Rev1-2.pdf

Can I please get:
1-Cell RGBAL Full 17 Channel (page 31 of PDF)
5-Cell RGBAL EXT 43 Channel (page 21 of PDF)
10-Cell RGBAL 50 Channel (Page 15 of PDF)

THANKS!
Mark

Just in case the full manual is here: https://www.chauvetprofessional.com/wp- ... 4_WO-2.pdf

Re: Profile Request: Chauvet Ovation B-2805FC

Posted: Mon Jul 10, 2017 9:55 am
by BobbyHarrell
I have added 3 “fixtures” to the latest library.
These would be used as building blocks to the requested modes.
They are all multi-element fixtures.
Chauvet Ovation B-2805FC Cell RGBAL
Chauvet Ovation B-2805FC Master Intensity
Chauvet Ovation B-2805FC Cell RGBAL EXT
http://pathwayconnect.com/downloads/strandlibrary/

IE: the 43 channel fixture would be (6) fixtures patched in DMX contiguous order:
Chauvet Ovation B-2805FC Master Intensity
Chauvet Ovation B-2805FC Cell RGBAL EXT
Chauvet Ovation B-2805FC Cell RGBAL EXT
Chauvet Ovation B-2805FC Cell RGBAL EXT
Chauvet Ovation B-2805FC Cell RGBAL EXT
Chauvet Ovation B-2805FC Cell RGBAL EXT

Re: Profile Request: Chauvet Ovation B-2805FC

Posted: Mon Jul 10, 2017 8:18 pm
by gafftaper
Thanks!

Re: Profile Request: Chauvet Ovation B-2805FC

Posted: Thu Jul 27, 2017 9:23 pm
by gafftaper
Hello again,

I got my new Ovations in and I'm working on setting them up. I'm trying to set them up in the 5 cell RGBAL EXT 43 Channel mode. I've got the master file set up with five copies of the RGBAL EXT following. The basic RGBAL, intensity, etc are working fine. However I can't find: The Color Wheel and Strobe. I see that it's created as an 8 channel profile and channels 6 and 8 should control the color wheel but I just can't figure out how to access them. Did they get left out of the profile or am I not looking in the right place?

Thanks!

Re: Profile Request: Chauvet Ovation B-2805FC

Posted: Mon Jul 31, 2017 7:19 pm
by gafftaper
Hello again,

After working with the fixtures a few days, my lighting guys want to go with 2 cell RGBAL EXT 19 Channel mode. Which unfortunately, I can't use the profiles you created to build. So, can you please give me one more profile that will cover this mode?

Sorry, I thought they would be all over 5 cell mode, but with the diffusion in the advantages of having more cells does not outweight the siginificant additional programming time due to having so many additional cells.

Thanks!