Christie Digital

Questions on Palette and Light Palette operation and features
Post Reply
User avatar
TerryHynes
Posts: 574
Joined: Tue Dec 18, 2007 1:41 pm
Location: Kitchener, Ontario, Canada
Contact:

Christie Digital

Post by TerryHynes » Wed Feb 13, 2008 9:24 am

We have a Christie Digital projector which has 10 attributes. How do I make this work on the Palette?
Terry Hynes
Head of Lighting
Centre In The Square
Kitchener, Ontario
Canada

User avatar
BrianEvans
Posts: 700
Joined: Fri Oct 12, 2007 1:11 pm
Location: Orlando, Florida

Re: Christie Digital

Post by BrianEvans » Wed Feb 13, 2008 9:43 am

I can build a library for it if you desire.

Just forward detailed DMX information to:
support@horizoncontrol.com

Best bet is the entire manual, this way if it has things like a zoom range, etc.,
It can be noted. DMX charts alone rarely have the information needed to build a library.
Brian Evans - System Specialist - Horizon Control Inc.

User avatar
TerryHynes
Posts: 574
Joined: Tue Dec 18, 2007 1:41 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: Christie Digital

Post by TerryHynes » Wed Feb 13, 2008 10:33 am

Thanks, Brian. Tried to sent the manual as a PDF but it is over the size limit allowed. Is there some other way I can send it?
Terry Hynes
Head of Lighting
Centre In The Square
Kitchener, Ontario
Canada

User avatar
RobertBell
Posts: 2421
Joined: Fri Oct 12, 2007 1:11 pm
Primary Venue / Use: Other
Where I Am: Horizon Control Inc
Location: On the dark side just north of Toronto
Contact:

Re: Christie Digital

Post by RobertBell » Wed Feb 13, 2008 10:50 am

Robert Bell - Product Manager - Horizon Control Inc.

User avatar
TerryHynes
Posts: 574
Joined: Tue Dec 18, 2007 1:41 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: Christie Digital

Post by TerryHynes » Wed Feb 13, 2008 10:57 am

Here is the DMX info as a Word Doc. Let me know if this works for you.
HD8K DMX.doc
(25.5 KiB) Downloaded 57 times
Terry Hynes
Head of Lighting
Centre In The Square
Kitchener, Ontario
Canada

User avatar
BrianEvans
Posts: 700
Joined: Fri Oct 12, 2007 1:11 pm
Location: Orlando, Florida

Re: Christie Digital

Post by BrianEvans » Wed Feb 13, 2008 11:49 am

Hey Terry,

That is pretty good.

A few questions.

1. Is the slider lock defaulted to "lock" or "unlock". (From what I read "unlock" is proabbly best,
that way the control power is accessible with no fuss.)
2. Lens Zoom range in degrees? (IE: 10 to 30 degrees, etc.)
3. Lens Pan and tilt range? (IE: + or - 10 degrees on pan and tilt (20 degrees total on each)

Any info would help.
Brian Evans - System Specialist - Horizon Control Inc.

User avatar
TerryHynes
Posts: 574
Joined: Tue Dec 18, 2007 1:41 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: Christie Digital

Post by TerryHynes » Wed Feb 13, 2008 1:06 pm

Looks like "unlocked" should be the default. We have two zoom lenses 4.1-1 and 6.9-1. Pan & tilt offsets are +119%/-119% vertical and +42%/-42% horizontal.

NOTES: 1) 0% offset is equal to half the image above and below lens center OR half the image to the left or right of lens
center. 2) Offsets are subject to a ± 7% centering tolerance.

I hope this helps. Let me know. Thanks.
Terry Hynes
Head of Lighting
Centre In The Square
Kitchener, Ontario
Canada

User avatar
BrianEvans
Posts: 700
Joined: Fri Oct 12, 2007 1:11 pm
Location: Orlando, Florida

Re: Christie Digital

Post by BrianEvans » Thu Feb 14, 2008 8:36 pm

Brian Evans - System Specialist - Horizon Control Inc.

User avatar
TerryHynes
Posts: 574
Joined: Tue Dec 18, 2007 1:41 pm
Location: Kitchener, Ontario, Canada
Contact:

Re: Christie Digital

Post by TerryHynes » Fri Feb 15, 2008 3:07 pm

Thanks, Brian. I'll give it a try.
Terry Hynes
Head of Lighting
Centre In The Square
Kitchener, Ontario
Canada

Post Reply