Page 1 of 1

Setting faders as submasters on 500ml

Posted: Tue Aug 16, 2016 3:41 pm
by Klemay83
How do you set up the faders as submaster instead of having them as cuelist playbacks?

Re: Setting faders as submasters on 500ml

Posted: Tue Aug 16, 2016 5:27 pm
by mpeters
There is no submaster setting in the 500ml. What you have to do is record a cue to a fader and then run the cue. What I normally do if I need a fader to act like a submaster is to record the channels to the fader as a cue and then set the Fader to Infade. What that will do is active the cue with the fader so you don’t have to press the go button. To get to that setting you press Edit button and then press the Play button of the fader that you recorded.

Now something to remember is if you want to use those channels to record into another cuelist you have to select the option under Fixture Selection “In playback” before recording another cue. That will select everything you currently have at a level in your playback. If you have any questions, let me know, thanks.


Matthew Peters, Strand Tech Support Specialist
Matthew.peters@philips.com