Page 1 of 1

macro question

Posted: Tue Apr 14, 2015 1:39 pm
by mat
I would like to put a cuelist (which is a chaser) on a submaster.
I succeed in by putting a macro on the slider:
full is cuelist go
O% is cruelest release

How can I put a script that says slider at 1% is cruelest master at 1%, slider at 2% is cruelest master at 2%, etc...
untill slider at 100% is cruelest master at 100% ?


thanks for help.

For information I have a Lightpalette VL but I don't want to have the 12 cuelist I prefer the "looks on playbacks"

Re: macro question

Posted: Wed Apr 15, 2015 8:01 am
by BobbyHarrell
I would just put the cue lists channels in the submaster and make it an inhibitive.

Re: macro question

Posted: Wed Apr 15, 2015 8:59 am
by mat
Well,
the thing is I use the same channels in different cuelists... :D

Re: macro question

Posted: Wed Apr 15, 2015 3:35 pm
by BobbyHarrell
I can't see that that matters. If I understand you correctly, then when I'm running the cuelist, I would have master control from the fader. If it's coming from the current cue list, then it will inhibit it's value. There is nothing that would just inhib those values but only what is coming from that cue list.

Re: macro question

Posted: Wed Apr 15, 2015 3:45 pm
by mat
ok,
I use a main cuelist for the show.
and I have chasers on other cuelists.
same channels are used in main and chasers.
here is what would happen if i use inhibit:
CUE 4 of main cuelist on stage with channels 1 thru 6 @ 30%.
I run cuelist 2 which is a chase of channels 1 thru 6.
if i inhibit it will inhibit both cuelists and I don't want that, I want to keep these channels @ 30% and run the chase over it.

In fact what a bump chase would do...