Page 1 of 1

Diversitronics Mark 2000 Strobe

Posted: Thu Apr 11, 2013 12:43 pm
by jmac
Anyone have experience programming this strobe light, with Palette OS V10..? Having trouble getting a handle on it...

Is there an update from the 12/18/2007 software in the fixture library? A couple special effects seem to be missing (fade up and arc weld). And the full range of flash rates doesn't seem to be available..

And once a special effect is programmed in a cue, I'm not sure how to turn it off..

Thanks!

Re: Diversitronics Mark 2000 Strobe

Posted: Thu Apr 11, 2013 4:36 pm
by bnortin
There was an update to the fixture library on 4/10/13, you can find the new ones here:
OLE:
http://www.horizoncontrol.com/strandlib ... xtures.zip
OS:
http://www.horizoncontrol.com/strandlib ... xtures.zip

If that doesn't fix your problem, you can also send an email to support@hirizoncontrol.com with requests regarding a specific profile.

As far as stopping an effect, go to the cue where you want to stop it and make an adjustment to the attributes that were in the effect. Record Delta, and you should be good.

Re: Diversitronics Mark 2000 Strobe

Posted: Fri Apr 12, 2013 9:55 am
by BobbyHarrell
Just email me any fixture request and let me know if the latest fixture library did not take care of it.

bobby.harrell@philips.com