Fixture check / Submaster Exclusif

Questions on Palette and Light Palette operation and features
Post Reply
PierTis
Posts: 354
Joined: Sat Nov 24, 2007 6:33 am

Fixture check / Submaster Exclusif

Post by PierTis » Thu Mar 10, 2011 6:30 am

Hi,
i've a channel on Submaster Exclusif
-down=intensity at 0 in yellow

i check Fixtures on my show [Shift+Tool] {S2 Fixture check}
-on my Fixture (on Sub Exclusif) the check takes the level 80%

1/Is it normal?
2/Is it possible to make a choice on this level 80% ? (or is it like Hightlight?)
3/No Priority on this Sub Exclusif (even 1)is efficace . These fonctions work direct on output from board ?
Capture
If i've a curve On/Off on a Dimmer
- [S6 Output] Dimmer At 10% Enter pass direct in Output of the board
4/is there a possibility to pass Curve on priority upper Output?
Thanks

User avatar
RobertBell
Posts: 2421
Joined: Fri Oct 12, 2007 1:11 pm
Primary Venue / Use: Other
Where I Am: Horizon Control Inc
Location: On the dark side just north of Toronto
Contact:

Re: Fixture check / Submaster Exclusif

Post by RobertBell » Thu Mar 10, 2011 11:31 am

1) :added: Bug 335 - Add Highlight (lowlight) into the editable Priority list (Make 35 by default)
2) no - fixed at 80%
3) What is correct? If you have an inverted profile (0 is FF in DMX), when you type [S6-Output] [x] [@] [y] [Enter] is the output of DMX y or 255-y? Currently it is y.
4) Is this the same question as 3)?
Robert Bell - Product Manager - Horizon Control Inc.

PierTis
Posts: 354
Joined: Sat Nov 24, 2007 6:33 am

Re: Fixture check / Submaster Exclusif

Post by PierTis » Fri Mar 11, 2011 2:30 am

i need very often to put direct by curve On/Off : (scrollers, electrique-contact, Lampe Hmi..).
even i use ParkA,B,..
But nothing protect again Output At 30% on critique dimmer,
or Output check Forwad

Post Reply