movers taking short cut

Questions on Palette and Light Palette operation and features
Post Reply
Posts: 5
Joined: Thu Aug 05, 2010 3:14 pm
Primary Venue / Use: University
Where I Am: Hamilton,Ontario,Canada

movers taking short cut

Post by Taras » Thu Nov 11, 2010 3:36 pm

2 movers in this cue. Mover 1 is given a path to follow over a cue time. Mover 2 is given a mirrored path in the same cue. At GO mover 1 takes the path while mover2 takes the shortest route to end position. What cueing error is being made?

User avatar
Posts: 160
Joined: Mon Feb 04, 2008 2:58 pm
Location: South Of Atlanta

Re: movers taking short cut

Post by golights » Thu Nov 11, 2010 4:44 pm

It sounds like one fixture is set to polar movement and the other fixture is set to linear movement. This is setup in position of the fixtures S5, S1 P/T mode. Check to see if they are both set the same.

User avatar
Posts: 2421
Joined: Fri Oct 12, 2007 1:11 pm
Primary Venue / Use: Other
Where I Am: Horizon Control Inc
Location: On the dark side just north of Toronto

Re: movers taking short cut

Post by RobertBell » Tue Nov 16, 2010 11:45 am

also - make sure you know about flip ... p/flip.htm
Robert Bell - Product Manager - Horizon Control Inc.

Post Reply