Search found 354 matches

by BrianEvans
Thu Jun 28, 2012 10:59 am
Forum: Operational Issues
Topic: RGB not at full
Replies: 1
Views: 635

Re: RGB not at full

Set the CCT Mode channel to "Direct".
by BrianEvans
Tue Jun 12, 2012 4:48 pm
Forum: Questions
Topic: channel next/last intensity
Replies: 3
Views: 1617

Re: channel next/last intensity

While you are using highlight, you'll notice the fixture has a red ring around it as well, if you want to record the fixture that is current in highlight, you can just move your level wheel, and it will pick up from the highlight level. It will now have a Delta so you can record it.
by BrianEvans
Sat Apr 07, 2012 3:04 am
Forum: Questions
Topic: Macro To Change Sub Page
Replies: 5
Views: 906

Re: Macro To Change Sub Page

Yeah, UI macros have their downside. But if the console is in a mode to accept input from the user on the command line, the UI macros will always work. As you said, they are absolutely depending on the command line to be clear before working properly, and the user sitting in an approprite view. (Liv...
by BrianEvans
Mon Apr 02, 2012 6:01 pm
Forum: Questions
Topic: building automation system interface
Replies: 2
Views: 646

Re: building automation system interface

TCP/IP over Ethernet connections can be established as well.
by BrianEvans
Mon Apr 02, 2012 5:58 pm
Forum: Questions
Topic: Macro To Change Sub Page
Replies: 5
Views: 906

Re: Macro To Change Sub Page

UI macros work for this, but the catch is you need to use a blank cue list to space out the timing on the command line, and the command line must be clear when it runs. UI macros simulate button presses, so with the right combination, there isn't much you can't do. The problem is the timing which is...
by BrianEvans
Tue Jan 10, 2012 3:56 pm
Forum: Questions
Topic: HC.OutputParkA,B,C,D,.....G,H...?
Replies: 2
Views: 590

Re: HC.OutputParkA,B,C,D,.....G,H...?

there are 4 park groups, A B C D.
you'll need to use the % symbol.
You are parking at DMX level 100, which is 39%
Also, you'll need the quotes on the park groub if you are using a letter instead of number.
HC.OutputPark(1,'100%','B')
same as
HC.OutputPark(1,255,2)
by BrianEvans
Sat Nov 12, 2011 12:16 am
Forum: Questions
Topic: 10.8.4 FX from sub to cue
Replies: 2
Views: 482

Re: 10.8.4 FX from sub to cue

"Load" the look into the programmer.
Knockout all unwanted fixtures and / or effects, record to a cue "Delta".
by BrianEvans
Fri Nov 04, 2011 10:45 am
Forum: Questions
Topic: Calling a Position At a time
Replies: 3
Views: 598

Re: Calling a Position At a time

If you can sacrifice an A/B or C/D playback,
in hardware setup you can switch these faders to control "Captured in time and release time".
The faders then range from 1 to 10 seconds.

Very handy for busking in the programmer.
by BrianEvans
Thu Nov 03, 2011 3:32 pm
Forum: Questions
Topic: Momentary stoppage of effects
Replies: 2
Views: 501

Re: Momentary stoppage of effects

The easiest thing to do is write a look master that is set to "Assertive LTP".
When you write the look, be sure to force delta on the entire fixture,
then record "changed - delta"
by BrianEvans
Thu Oct 20, 2011 11:37 am
Forum: Questions
Topic: Macros on bumps
Replies: 2
Views: 532

Re: Macros on bumps

Your "Action" column is probably hidden in the "Looks" display.
Right-Clickin the column header area, and select it.

At that point you can put actions on fader behavior, such as, when the level hits 100% known as "On Value".