Go to this thread, the download is there and some explaination of use.
viewtopic.php?f=16&t=1838&p=8766&hilit= ... oint#p8766
Search found 109 matches
- Thu Mar 11, 2010 11:30 am
- Forum: Questions
- Topic: RGB Color mixing for a newbie board op
- Replies: 2
- Views: 388
Look at this post http://www.strand-dev.com/forums/viewtopic.php?f=31&t=2399&p=11921&hilit=rgb+cyc#p11921 It talks about it a little. You would need to patch a rgb fixture then put your leko dmx channels in that fixture. Then you would select the rgb fixture from the live screen and you would be abl...
The net slot might be setup for Artnet when you want it to be dmx. What dmx address you are sending and what protocol (shownet, dmx,ect) are you using and what net slot have you got set up?
In hardware setup S3, go to button array S10, select bank d S4, it should say 'other 1', to its left there is a box that says look page S5, scroll down to 'other' and select or highlight, at the bottom it says first button number, change that to 26, press add S6. You should now see in bank d 'other ...
One way to label some attritabutes would be to record them in the [Other] palette and label them there. Then when you wanted to set that attribute you could do [tool ][other] and select the attribute by its label. That way in the ML attribute box you would see the label and know the setting. Kind of...
If you knew what the labeling should be for each attribute you might could get Gary to update the profile for the catalyst with the lables in it. Send a email to email@example.com with what you need and see if this is possible.
I think the profile has to be associated with the attribute, Scroller with a color attribute, gobo with a gobo attribute. I'm not sure what attribute the blank profile fits in. You can build a scroller profile and attach it to a mover to allow the color to show up the 'colors in grid' bubbles. Maybe...