Search found 354 matches

by BrianEvans
Mon Sep 30, 2013 12:04 pm
Forum: Questions
Topic: cyc 3 cell 3 channels
Replies: 11
Views: 4978

Re: cyc 3 cell 3 channels

I put a new fixture in the latest library.
Generic RGB Cyc 3 Channel - 3 Address
http://www.pathwayconnect.com/downloads/strandlibrary/

Reg is in Addr: 1, Green in Addr: 2, etc.

This will make it easier to patch to non-contiguous dimmers.
by BrianEvans
Wed Sep 25, 2013 10:17 am
Forum: Questions
Topic: SMPTE in and out
Replies: 1
Views: 1944

Re: SMPTE in and out

Hello Jim, The method you describe works very well, but I would be suspicious of the incoming SMPTE signal. When Palette starts missing cues, often the signal gain is too low, or even too high, being distorted. We always recommend running SMPTE to Palette through a re-shaper such as a Brainstorm. Pa...
by BrianEvans
Wed Aug 28, 2013 10:43 am
Forum: Questions
Topic: Gel library
Replies: 3
Views: 2211

Re: Gel library

Hello Matt,

The 500 and 600 series have been added to the latest library.
http://www.pathwayconnect.com/downloads/strandlibrary/

Please send a list of any other gels you find to be missing to:
fixtures@pathwayconnect.com
by BrianEvans
Sat Aug 24, 2013 8:59 am
Forum: Questions
Topic: Gel library
Replies: 3
Views: 2211

Re: Gel library

No problem Matt, this is a function of the fixture library.
I'll dig through and take a look. It may take a few weeks though.
by BrianEvans
Thu Jul 11, 2013 11:18 am
Forum: Questions
Topic: Display Color Issue
Replies: 2
Views: 2109

Re: Display Color Issue

If the cue list flashes to the wrong color, sometimes displaying another cue list, then back to the one that changed will help.
by BrianEvans
Sat Feb 23, 2013 10:37 am
Forum: Questions
Topic: Palette & Arkaos & LED Mapper
Replies: 3
Views: 3317

Re: Palette & Arkaos & LED Mapper

Hello Matt, If you you are using the Pixel mapper that we did, it is independant of your DMX output. It simply controls the fixtures within Palette. So if your fixtures are patched in Palette, you should be all set. Just be sure you have the Generic Pixel Mapper "fixture" in your show file, but unpa...
by BrianEvans
Thu Nov 01, 2012 11:59 pm
Forum: Questions
Topic: Connecting an Old dimmer pack
Replies: 3
Views: 1801

Re: Connecting an Old dimmer pack

Pathway Connectivity has devices that can turn DMX into just about any control signal.

http://pathwayconnectivity.com/
by BrianEvans
Sun Oct 07, 2012 7:49 am
Forum: Suggestions
Topic: Cue List "Select Cue" Macro
Replies: 7
Views: 3043

Re: Cue List "Select Cue" Macro

The only way I can think of to do what you want is clever linking in the main cue list. Put in a point cue in the main cue list that has the macro to run the effect. But in the cue before the point cue, put in a link that links past the cue that has nothing but the effect macro in it. This way, when...
by BrianEvans
Sat Oct 06, 2012 3:37 pm
Forum: Suggestions
Topic: Cue List "Select Cue" Macro
Replies: 7
Views: 3043

Re: Cue List "Select Cue" Macro

Why aren't you just using the master and slave cue lists feature?
by BrianEvans
Fri Aug 31, 2012 11:44 am
Forum: Questions
Topic: colour effects
Replies: 2
Views: 2347

Re: colour effects

With that many LEDs, you should use the Pixel Mapper app that Robert did. The only other way to select 2 specific colors is by changing your color space to Hue, then using a square wave on Hue, you can select the Hi and Low value, in turn, you end up with 2 specific colors, but only at the same satu...