Search found 186 matches

by tom
Sun Dec 18, 2011 12:35 pm
Forum: Questions
Topic: 1
Replies: 3
Views: 703

Re: Выключается компьютер...

Delete this thread or at least change the title.
by tom
Sun Dec 18, 2011 12:34 pm
Forum: Questions
Topic: скажите фильм в стиле кунфу
Replies: 2
Views: 704

Re: скажите фильм в стиле кунфу

The post are coming from spam bots, nobody is going to read this, except russian lighting technicians who are using strand lighting consoles. I know it was meant as a joke but its not the most welcoming words for new users. One week ago I was working in moscow, they had a 520 and were interested in ...
by tom
Tue Nov 29, 2011 12:16 pm
Forum: Open Source
Topic: (LUA) Selection cropping
Replies: 2
Views: 1723

Re: (LUA) Selection cropping

I used this last week while programming with a 18*5 PAR matrix. We did alot of different levels and gradients so I used this for tweak certain areas. Make a rough selection and then fine tune it with the scripts. Also working now with a 900+ fixture matrix and it's been handy. Though this show has a...
by tom
Tue Nov 29, 2011 11:48 am
Forum: Open Source
Topic: (LUA) Selection cropping
Replies: 2
Views: 1723

(LUA) Selection cropping

Crops a selection set based on a high and low value. Reads a level from a look(channel 9995) and filters the selection based on the level. With one script you can use the level as a low end and another script uses it for a high end. I use 9995 because this is the way it panned out for me. If you wan...
by tom
Tue Nov 29, 2011 11:18 am
Forum: Open Source
Topic: Selection and deselection possible bug 10.8.4
Replies: 0
Views: 1345

Selection and deselection possible bug 10.8.4

HC.Deselect problems. So it goes like this. New show, new look, action - HC.Deselect(1) Then if i run the script it takes fixture 1 out of the selection, no problems there. example - 1/5* (selects 1 thru 5) run script - deselects fixture 1. Now the problem comes when i assign a value 1/5@50* run scr...
by tom
Fri Nov 18, 2011 2:21 pm
Forum: Questions
Topic: script request
Replies: 0
Views: 493

script request

I'm looking for something like, HC.CuelistGotoAndHalt('cuelist', cue no., in cue time) Basically i want to be able to "goto" a specific cue in the original cue time (in my case up in 1, down in 5) through a script. Right now it only uses the default goto time of the board. And, of course , i need it...
by tom
Thu Nov 10, 2011 10:54 am
Forum: Hints
Topic: Macro selecting parametre ...top thrust or angle
Replies: 5
Views: 2443

Re: Macro selecting parametre ...top thrust or angle

Yep thats pretty much exactly what i had in mind. I use that script to control movers from my phone. For marco 5x5, you could make your own with the web server quite easily. If you take a look at the mote webapp theres 4 marco launchers. You could strip out the page completely and only populate it w...
by tom
Tue Nov 08, 2011 10:23 am
Forum: Questions
Topic: VLC video player
Replies: 1
Views: 441

Re: VLC video player

Yes, more or less. I've mapped a channel to send keystrokes. Like space for example, starting and stopping VLC. How ever this wasnt so effective. There is undoubtedly more you can do with it but you'll probably need an in between application. I've made a video mixer in puredata that is controlled by...
by tom
Tue Nov 08, 2011 10:15 am
Forum: Hints
Topic: Macro selecting parametre ...top thrust or angle
Replies: 5
Views: 2443

Re: Macro selecting parametre ...top thrust or angle

You could have a marco that will bump the top thrust in by one percent (or some other small value) and then another button for an out. This could be based on your selction. Practical explaination: Select a fixture, Bump button A will bring the top shutter in by 1% in relation to the value it already...
by tom
Tue Nov 08, 2011 10:03 am
Forum: Questions
Topic: FX question - is it possible
Replies: 3
Views: 752

FX question - is it possible

One channel in two effects at the same time, In this example, two subs with effects. Sub one, channel 1, sine effect @ rate 100% Sub two, channel 1, sine effect @ rate 50% Then i want to use both at the same time. Lamp is pulsing fast with a slower pulse going through it. The reality is a bit more c...